Related Experiment Video

Updated: Jun 28, 2026

Microfluidic On-chip Capture-cycloaddition Reaction to Reversibly Immobilize Small Molecules or Multi-component Structures for Biosensor Applications
14:43

Microfluidic On-chip Capture-cycloaddition Reaction to Reversibly Immobilize Small Molecules or Multi-component Structures for Biosensor Applications

Published on: September 23, 2013

Flow-injection analysis systems with immobilized enzymes. Improvement of applicability by integration of coupled

H L Schmidt1, T Becker, I Ogbomo

  • 1Lehrstuhl für Allgemeine Chemie und Biochemie, Technische Universität München, Vöttingerstrasse 40, Freising-Weihenstephan, Germany.

Talanta
|June 1, 1996
PubMed

More Related Videos

High-throughput and Comprehensive Drug Surveillance Using Multisegment Injection-Capillary Electrophoresis-Mass Spectrometry10:17

High-throughput and Comprehensive Drug Surveillance Using Multisegment Injection-Capillary Electrophoresis-Mass Spectrometry

Published on: April 23, 2019

Fast Enzymatic Processing of Proteins for MS Detection with a Flow-through Microreactor09:49

Fast Enzymatic Processing of Proteins for MS Detection with a Flow-through Microreactor

Published on: April 6, 2016

Related Concept Videos

Gas Chromatography: Sample Injection Systems01:08

Gas Chromatography: Sample Injection Systems

In gas chromatography, the sample is introduced as a vapor plug into the carrier gas stream for high efficiency and resolution. A microsyringe injects the sample solution into a heated sample port, vaporizing it and mixing it with the carrier gas. This process is important to ensure the sample is properly prepared for analysis. Thermally sensitive samples can be injected directly into the column and volatilized by slowly increasing the column temperature.
Two primary injection methods are used...
Fast Reactions01:27

Fast Reactions

Fast reactions occurring in times shorter than the time needed to mix reactants pose a unique challenge for investigation. In a liquid-phase continuous-flow system, reactants A and B are swiftly pushed into the mixing chamber, where mixing occurs within 1 ms. The reaction mixture then flows through an observation tube, and one measures light absorption to determine species concentrations at various points of the tube. This method is most appropriate when relatively large volumes of reactants...