Related Experiment Video
Updated: Jun 28, 2026

Construction of Models for Nondestructive Prediction of Ingredient Contents in Blueberries by Near-infrared Spectroscopy Based on HPLC Measurements
Published on: June 28, 2016
Simultaneous determination of the colorants tartrazine, ponceau 4R and sunset yellow FCF in foodstuffs by solid phase
L F Capitán-Vallvey1, M D Fernández, I de Orbe
1Department of Analytical Chemistry, University of Granada, E-18071, Granada, Spain.
Abstract:
A method is proposed for the simultaneous determination of the colorants tartrazine (TT), sunset yellow FCF (SY) and ponceau 4R (PR) in foods. The colorants were fixed in Sephadex DEAE A-25 gel at pH 2.0 and then packed in a 1-mm silica cell. The spectra of the analytes fixed in the solid support were recorded between 400 and 800 nm against a blank and the partial least squares (PLS) multivariate calibration was used to obtain the results. The linear dynamic ranges of the calibration graphs were from 50.0 to 650.0 ng ml(-1) for the three colorants and these ranges were taking in account the optimisation of the calibration matrix using the PLS-1 algorithm. The experimental results showed that the optimum number of factors for the calibration matrix was four in all instances and the residual means standard deviation was 5.5267 for SY, 6.3878 for TT and 6.9816 for PR. The square of the correlation coefficients were 0.9977, 0.9978 and 0.9954 for SY, TT and PR respectively. The method was applied to the determination of the colorants in foods and results were compared with those obtained by means of HPLC as reference method. The results obtained can be considered as acceptable in most cases (eight of nine commercial samples). The relative standard deviations ranging between 0.5 and 10.8 for the commercial samples analysed.
Related Concept Videos
Precipitation Titration: Endpoint Detection Methods
In the Volhard method, a standard excess of AgNO3 is first added to the...
UV–Vis Spectroscopy of Conjugated Systems
One of the factors influencing λmax is the extent of conjugation in the...
Indicators
Calibration Curves: Linear Least Squares
For data that follow a straight line, the standard method for fitting is the linear...
Instrument Calibration
Analytical Balance Calibration
An analytical balance measures mass and requires regular calibration to...

