Using optical remote sensing techniques to track the development of ozone-induced stress

Michele Meroni1, Cinzia Panigada, Micol Rossini

  • 1Remote Sensing of Environmental Dynamics Laboratory, DISAT, University of Milan-Bicocca, Piazza della Scienza, 1, 20126 Milan, Italy. michele.meroni@unimib.it

Related Concept Videos

Stress Concentrations01:13

Stress Concentrations

The concept of stress concentration is crucial for understanding how materials respond under bending stresses, particularly when there are irregularities or discontinuities in the material's geometry. Normally, stress in a symmetric member subjected to pure bending is assumed to be uniformly distributed across the entire cross-section. However, this assumption does not hold when there are variations in the cross-sectional geometry or the presence of notches and holes.
The stress concentration...
Stress Concentrations01:24

Stress Concentrations

Stress concentration is when stress intensifies near discontinuities such as holes or abrupt cross-sectional changes in a structural member. This localized stress can often surpass the average stress within the member. The stress distribution in flat bars, either with a circular hole or varying widths connected by fillets, can be determined experimentally using a photoelastic method. The results are based on ratios of geometric parameters like the ratio of the hole's radius to the smaller width...
Stress Response System01:21

Stress Response System

The stress response system, also known as the fight-or-flight response, is the body's automatic physiological reaction to perceived threats. Hans Selye introduced the concept of General Adaptation Syndrome (GAS) to describe the predictable pattern of changes that occur in response to stress. GAS consists of three sequential stages: alarm, resistance, and exhaustion. This model helps explain how chronic stress can contribute to health problems.
Alarm stage
In the alarm stage, the body's initial...