Related Experiment Video
Updated: Jun 28, 2026

A Novel Technique for Raman Analysis of Highly Radioactive Samples Using Any Standard Micro-Raman Spectrometer
Published on: April 12, 2017
Application of portable Raman instruments for fast and non-destructive detection of minerals on outcrops
J Jehlicka1, P Vítek, H G M Edwards
1Charles University, Institute of Geochemistry, Mineralogy and Mineral Resources, Prague, Czech Republic. jehlicka@natur.cuni.cz
Abstract:
Raman spectral signatures have been obtained in situ for a series of minerals using portable Raman instruments. Cerussite, anglesite, wulfenite, titanite, calcite, tremolite, andradite and quartz were detected using portable Raman spectrometer First Defender XL (Ahura). Baryte, almandine and realgar Raman spectra obtained by this instrument in the field were compared to the data measured by the other mobile Raman instrument Inspector Raman (DeltaNu). Bench Raman dispersive microspectrometer (InVia Reflex, Renishaw) was used for comparative purposes. All spectra were obtained using a 785nm diode excitation. Although displaying lower spectral resolution comparing with the laboratory confocal instrument both portable instruments permit unambiguous detection of minerals in the field. These possibilities designate portable Raman machines as excellent tools for field geological applications. Miniaturised Raman instrument combined with LIBS will be included in the payload of the EXO Mars mission and would open interesting research possibilities in other in situ field planetary studies.
More Related Videos
14:55Analysis of Minerals Produced by hFOB 1.19 and Saos-2 Cells Using Transmission Electron Microscopy with Energy Dispersive X-ray Microanalysis
Published on: June 24, 2018
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Applications of IR Spectroscopy: Overview
Rapid Identification of Pathogens