Related Experiment Video
Updated: Jun 27, 2026

Continuous-Wave Propagation Channel-Sounding Measurement System - Testing, Verification, and Measurements
Published on: June 25, 2021
Transmission loss measurements and geoacoustic sensitivity modeling at 1.2 kHz
Abstract:
The Shallow Water Experiment 2006 was conducted off the coast of New Jersey in the summer of 2006. Defence Research and Development Canada-Atlantic performed a series of experiments designed to validate the use of rapid environmental assessment tools and methods to improve active sonar performance predictions. The sensitivity of acoustic propagation to a varying or uncertain environment is determined by examining the relative change of acoustic pressure caused by environmental variability, using the method described recently [Dosso et al., J. Acoust. Soc. Am. 121, 42 (2007)]. The variability of the modeled environmental parameters is based on measured and estimated oceanographic and geoacoustic properties. The resulting sensitivity is compared to measured transmission loss data at 1.2 kHz.
Related Concept Videos
Transmission Line Design Considerations
Lossless Lines
Boundary Conditions: Lossless Lines
At the receiving end, the boundary condition states that the voltage equals the product of the receiving-end impedance and current. This relationship is expressed as a function of the incident and...
Lossy Lines and Overvoltages
Attenuation
When constant series resistance and shunt conductance are present, voltage and current equations are modified. The propagation constant indicates that voltage and current waves consist of both forward and backward traveling components. These waves attenuate as they propagate, with the attenuation factor related to the resistance and conductance. In a...
Traveling Waves: Lossless Lines
Susceptibility, Permittivity and Dielectric Constant

