Size exclusion chromatography with dual-beam refractive index gradient detection of polystyrene samples

Non-aqueous size exclusion chromatography (SEC) of polystyrenes (as model analytes) is examined using the microscale molar mass sensor (mu-MMS) for detection. The mu-MMS is combined with SEC to demonstrate this simultaneously universal and molar mass selective detection method for polymer characterization. The mu-MMS is based on measuring the refractive index gradient (RIG) at two positions (upstream and downstream) within a T-shaped microfluidic channel. The RIG is produced from a sample stream (eluting analytes in the mobile phase) merging with a mobile phase stream (mobile phase only). The magnitude of the RIG is measured as a probe beam deflection angle and is related to analyte diffusion coefficient, the time allowed for analyte diffusion from the sample stream toward the mobile phase stream, and the bulk phase analyte refractive index difference relative to the mobile phase. Thus, two deflection angles are measured simultaneously, the upstream angle and the downstream angle. An angle ratio is calculated by dividing the downstream angle by the upstream angle. The mu-MMS was found to extend the useful molar mass calibration range of the SEC system (nominally limited by the total exclusion and total permeation regions from approximately 100,000g/mol to approximately 800g/mol), to a range of 3,114,000-162g/mol. The injected concentration LOD (based on 3s statistics) was 2ppm for the upstream detection position. The point-by-point time-dependent ratio, termed a 'ratiogram', is demonstrated for resolved and overlapped peaks. Within detector band broadening produces some anomalies in the ratiogram shapes, but with highly overlapped distributions of peaks this problem is diminished. Ratiogram plots are converted to molar mass as a function of time, demonstrating the utility of SEC/mu-MMS to examine a complex polymer mixture.