Related Experiment Video

Updated: Jun 26, 2026

Enabling High Grayscale Resolution Displays and Accurate Response Time Measurements on Conventional Computers
06:50

Enabling High Grayscale Resolution Displays and Accurate Response Time Measurements on Conventional Computers

Published on: February 29, 2012

Measurement uncertainty evaluation for emission color and luminance of displays

Jisoo Hwang1, Dong-Hoon Lee, Seongchong Park

  • 1Division of Physical Metrology, Korea Research Institute of Standards and Science, Daejeon 305-340, Korea. jhwang@kriss.re.kr

Applied Optics
|December 25, 2008
PubMed

More Related Videos

Blue-hazard-free Candlelight OLED10:18

Blue-hazard-free Candlelight OLED

Published on: March 19, 2017

Related Concept Videos

Uncertainty in Measurement: Reading Instruments02:46

Uncertainty in Measurement: Reading Instruments

Counting is the type of measurement that is free from uncertainty, provided the number of objects being counted does not change during the process. Such measurements result in exact numbers. By counting the eggs in a carton, for instance, one can determine exactly how many eggs are there in the carton. Similarly, the numbers of defined quantities are also exact. For example, 1 foot is exactly 12 inches, 1 inch is exactly 2.54 centimeters, and 1 gram is exactly 0.001 kilograms. Quantities...
Uncertainty: Overview00:59

Uncertainty: Overview

In analytical chemistry, we often perform repetitive measurements to detect and minimize inaccuracies caused by both determinate and indeterminate errors. Despite the cares we take, the presence of random errors means that repeated measurements almost never have exactly the same magnitude. The collective difference between these measurements - observed values - and the estimated or expected value is called uncertainty. Uncertainty is conventionally written after the estimated or expected value.
Uncertainty in Measurement: Accuracy and Precision03:37

Uncertainty in Measurement: Accuracy and Precision

Scientists typically make repeated measurements of a quantity to ensure the quality of their findings and to evaluate both the precision and the accuracy of their results. Measurements are said to be precise if they yield very similar results when repeated in the same manner. A measurement is considered accurate if it yields a result that is very close to the true or the accepted value. Precise values agree with each other; accurate values agree with a true value.
Margin of Error01:27

Margin of Error

The margin of error is also called the maximum error of an estimate. The margin of error is the maximum possible or expected difference between the observed sample parameter value and the actual population parameter value. For proportion, it is the maximum difference between the value of sample proportion obtained from the data and the true value of population proportion. As the true value of the population parameter is not known, the margin of error is calculated using the sample statistic.
Types of Errors: Detection and Minimization01:12

Types of Errors: Detection and Minimization

Error is the deviation of the obtained result from the true, expected value or the estimated central value. Errors are expressed in absolute or relative terms.
Absolute error in a measurement is the numerical difference from the true or central value. Relative error is the ratio between absolute error and the true or central value, expressed as a percentage.
Errors can be classified by source, magnitude, and sign. There are three types of errors: systematic, random, and gross.
Systematic or...
Uncertainty in Measurement: Significant Figures03:34

Uncertainty in Measurement: Significant Figures

All the digits in a measurement, including the uncertain last digit, are called significant figures or significant digits. Note that zero may be a measured value; for example, if a scale that shows weight to the nearest pound reads “140,” then the 1 (hundreds), 4 (tens), and 0 (ones) are all significant (measured) values.