Related Experiment Video
Updated: Jun 26, 2026

Isolation of Native Soil Microorganisms with Potential for Breaking Down Biodegradable Plastic Mulch Films Used in Agriculture
Published on: May 10, 2013
Study of the biodisintegration of a bioplastic material waste
Judith Sarasa1, Jose M Gracia, Carlos Javierre
1Department of Chemical Engineering and Environmental Technologies, University of Zaragoza, c/María de Luna 3, 50018 Zaragoza, Spain. jsarasa@unizar.es
Abstract:
The aim of this work was to study the biodisintegration degree of different pieces made of a biodegradable thermoplastic material, the polylactic acid (PLA) with and without corn in its composition, is studied. The pieces of different shapes and thicknesses were obtained by both injection and extrusion processes, where also a specific foaming additive of polystyrene was added. The PLA and PLA-corn manufactured pieces were subjected to aerobic degradation at a constant temperature of 58+/-2 degrees C for 90 days, following EN 14806 and ISO 20200:2004 Norms. It was found that the pieces made of PLA and PLA with foaming agent had an average biodisintegration degree of 63.6%. With regard to the pieces made of PLA-corn, an average biodisintegration degree of 79.7% was obtained. In this case, the percentage of non degraded material was independent of the size, shape and thickness of the original pieces.
Related Concept Videos
Bioplastics
Microbial Bioremediation of Plastics
Biological Treatment of Effluent and Waste Water
Biodeterioration
Bioremediation
Microbial Bioremediation of Hydrocarbons

