Related Experiment Video
Updated: Jun 26, 2026

3D Imaging of Soft-Tissue Samples using an X-ray Specific Staining Method and Nanoscopic Computed Tomography
Published on: October 24, 2019
Post-processing technique for improved assessment of hard tissues in the submicrometer domain using local synchrotron
Philipp Schneider1, Romain Voide, Marco Stampanoni
1Institute for Biomedical Engineering, University and ETH Zurich, Zurich, Switzerland.
Abstract:
During the last two decades micro-computed tomography has become the method of choice for the non-destructive assessment and quantitative morphometry of hard tissues in three dimensions. With the advent of third-generation synchrotron radiation sources, micro-computed tomography in the micrometer range has become feasible and has been employed to analyze local bone tissue properties. However, owing to limitations regarding the tradeoff between object size and spatial resolution, non-destructive conventional global computed tomography of hard tissues, such as bone, remains unachievable in the submicrometer domain so far. Here, we report on a post-processing technique for the assessment of hard tissues using local synchrotron radiation-based computed tomography, which overcomes this experimental limitation.
Related Concept Videos
Electron Microscope Tomography and Single-particle Reconstruction
Electron Tomography
Electron tomography can be performed either in TEM or STEM (scanning transmission...
Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...
Imaging Studies III: Computed Tomography
Super-resolution Fluorescence Microscopy

