A review of ceramic bearing materials in total joint arthroplasty

Bearings made of ceramics have ultra-low wear properties that make them suitable for total hip arthroplasty (THA) and total knee arthroplasty (TKA). When compared to cobalt chrome (CoCr)-on-polyethylene (PE) articulations, ceramics offer drastic reductions in bearing wear rates. Lower wear rates result in fewer wear particles produced by the articulating surfaces. In theory, this should reduce the risk of periprosthetic osteolysis and premature implant loosening, thereby contributing to the longevity of total joints. In addition to ceramics, other alternative bearing couples, such as highly cross-linked PE (XLPE) and metal-on-metal also offer less wear than CoCr-on-PE articulations in total joint arthroplasty. Alumina and zirconia ceramics are familiar to orthopaedic surgeons since both materials have been used in total joints for several decades. While not new in Europe, alumina-on-alumina ceramic total hips have only recently become available for widespread use in the United States from various orthopaedic implant manufacturers. As the search for the ideal total joint bearing material continues, composite materials of existing ceramics, metal-on-ceramic articulations, and new ceramic technologies will offer more choices to the arthroplasty surgeon. The objective of this paper is to present an overview of material properties, clinical applications, evolution, and limitations of ceramic materials that are of interest to the arthroplasty surgeon.