Related Experiment Video
Updated: Jun 25, 2026

Quasi-light Storage for Optical Data Packets
Published on: February 6, 2014
Ultra-low-loss optical fiber enabling purely passive 10 Gb/s PON systems with 100 km length
John D Downie1, A Boh Ruffin, Jason Hurley
1Corning Incorporated, 1 Riverfront Plaza, SP-AR-02-1, Corning, NY 14831, USA. downiejd@corning.com
Abstract:
We demonstrate time division multiplexing (TDM) and wavelength division multiplexing/TDM (WDM/TDM) long reach 10 Gb/s passive optical network (PON) architectures of 100 km reach with no infield amplification or dispersion compensation. The purely passive nature of the 100 km systems is enabled by the use of ultra-low-loss optical fiber with average attenuation of 0.17 dB/km and downstream transmission with a 10 Gb/s signal modulated with the duobinary format. The high tolerance of duobinary to dispersion, stimulated Brillouin scattering (SBS), and self-phase modulation (SPM) are all key factors to achieving good system performance at this distance, as is the significantly reduced loss from the ultra-low-loss fiber. We show that this combination of fiber and downstream signal format allow split ratios up to 1:128 for both system architectures. The achievable split ratio is reduced for standard single-mode fiber and/or use of an NRZ modulated downstream signal. Standard strength forward error correction (FEC) is used for the WDM/TDM system but is not required for the TDM system.
Related Concept Videos
Lossless Lines
Transmission Line Design Considerations
Boundary Conditions: Lossless Lines
At the receiving end, the boundary condition states that the voltage equals the product of the receiving-end impedance and current. This relationship is expressed as a function of the incident and...
Energy Stored In A Coaxial Cable
In the simplest form, a coaxial cable can be represented by two long hollow concentric cylinders in which the current flows in opposite directions. The magnetic field inside and outside the coaxial cable is determined by using Ampère's law. The magnetic field inside...
Lossy Lines and Overvoltages
Attenuation
When constant series resistance and shunt conductance are present, voltage and current equations are modified. The propagation constant indicates that voltage and current waves consist of both forward and backward traveling components. These waves attenuate as they propagate, with the attenuation factor related to the resistance and conductance. In a...
Reducing Line Loss
With a step-up transformer at the source, the voltage is increased, thereby reducing the current in the transmission lines since power loss in...

