Related Experiment Video
Updated: Jun 25, 2026

A Novel Bioreactor for High Density Cultivation of Diverse Microbial Communities
Published on: December 25, 2015
Factors affecting the performance of membrane bioreactor for piggery wastewater treatment
Thipsuree Kornboonraksa1, Seung Hwan Lee
1Department of Environmental Engineering, School of Civil and Environmental Engineering, Kumoh National Institute of Technology, Gyeongbuk 730-701, Republic of Korea.
Abstract:
This study was conducted to identify the factors affecting the performance of membrane bioreactor (MBR) for piggery wastewater treatment. The change of organic and nitrogen concentrations in piggery wastewater was studied to investigate the treatment efficiency. The increase of COD, BOD and NH(3)-N from 1150 to 2050 mg/L, 683 to 1198 mg/L and 154 to 248 mg/L has led to the decrease of treatment efficiency. Removal efficiencies of COD, BOD and NH(3)-N have decreased from 96.0% to 92.0%, 97.0% to 92.7% and 93.2% to 69.5%, respectively. The effects of biomass characteristics on membrane fouling were determined based on Pearson's correlation coefficient (r(p)). It was found that MLSS had a negative correlation with permeate flux (r(p)=-0.745, at significant level of 0.05) while sludge floc size a positive correlation (r(p)=0.731, at significant level of 0.05). MLSS and sludge floc size were found to be the dominant factors that controlled the membrane filterability while sludge viscosity, EPS, SMP and SV(30) have taken as the sub-factors affecting membrane fouling.
More Related Videos
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Microbial Wastewater Treatment
Bioreactor Design and Operational System
Bioreactor Controls-I
Bioreactor Controls-II
Upstream Processing

