Related Experiment Video
Updated: Jun 23, 2026

Silicon Metal-oxide-semiconductor Quantum Dots for Single-electron Pumping
Published on: June 3, 2015
Single-electron effects in non-overlapped multiple-gate silicon-on-insulator metal-oxide-semiconductor field-effect
1Department of Electronics Engineering, National Chiao Tung University, Hsinchu City, Taiwan, Republic of China.
Abstract:
This paper systematically presents controlled single-electron effects in multiple-gate silicon-on-insulator (SOI) metal-oxide-semiconductor field-effect transistors (MOSFETs) with various gate lengths, fin widths, gate bias and temperature. Our study indicates that using the non-overlapped gate to source/drain structure as an approach to the single-electron transistor (SET) in MOSFETs is promising. Combining the advantage of gate control and the constriction of high source/drain resistances, single-electron effects are further enhanced using the multiple-gate architecture. From the presented results, downsizing multiple-gate SOI MOSFETs is needed for future room-temperature SET applications. Besides, the tunnel barriers and access resistances may need to be further optimized. Since the Coulomb blockade oscillation can be achieved in state-of-the-art complementary metal-oxide-semiconductor (CMOS) devices, it is beneficial to build SETs in low-power CMOS circuits for ultra-high-density purposes.
More Related Videos
Related Concept Videos
Field Effect Transistor
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...

