Mechanical properties and in vitro response of strontium-containing hydroxyapatite/polyetheretherketone composites

Strontium-containing hydroxyapatite/polyetheretherketone (Sr-HA/PEEK) composites were developed as alternative materials for load-bearing orthopaedic applications. The amount of strontium-containing hydroxyapatite (Sr-HA) incorporated into polyetheretherketone (PEEK) polymer matrix ranged from 15 to 30 vol% and the composites were successfully fabricated by compression molding technique. This study presents the mechanical properties and in vitro human osteoblast-like cell (MG-63) response of the composite material developed. The bending modulus and strength of Sr-HA/PEEK composites were tailored to mimic human cortical bone. PEEK reinforced with 25 and 30 vol% Sr-HA exhibited bending modulus of 9.6 and 10.6 GPa, respectively; alternatively, the bending strengths of the composites were 93.8 and 89.1 MPa, respectively. Based on the qualitative comparison of apatite formation in SBF and quantitative measurement of MG-63-mediated mineralization in vitro, the Sr-HA/PEEK composite was proven to outperform HA/PEEK in providing bioactivity. However, no difference was found in the trend of cell proliferation and alkaline phosphatase activity between different composites. Strontium, in the form of strontium-containing hydroxyapatite (Sr-HA), was confirmed to enhance bioactivity in the PEEK composites.