Related Experiment Video
Updated: Jun 23, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Virgin volcanic rocks: kinetics and equilibrium studies for the adsorption of cadmium from water
Esayas Alemayehu1, Bernd Lennartz
1Institute for Land Use, Rostock University, 18059 Rostock, Germany. esayas16@yahoo.com
Abstract:
This study was initiated to investigate the adsorption of cadmium from aqueous solution by two different rock types-Pumice (VPum) and Scoria (VSco), which are readily available in Ethiopia and other countries. The influence of operational conditions, such as particle size, adsorbent/solution ratio, contact time, cadmium initial concentration, and pH was analyzed. The competition between metals was also evaluated. The Cd(II) removal capacity was predominantly affected by the pH conditions, being increased under alkaline conditions. For both adsorbents, when particle size was 0.075-0.425 mm, the maximum Cd(II) adsorption was observed at pH 6.0 (contact time=24h, shaking speed=200 rpm, adsorbent dose=50 g L(-1)). Adsorption process revealed that the initial uptake was very fast during the first 1h. The kinetics of the interactions follows pseudo second-order. Equilibrium assays confirm that VPum has a larger capacity and affinity for Cd(II) adsorption than VSco. Both Langmuir and Freundlich models described equally well the experimental data. VPum and VSco were found to be promising material for the removal of cadmium from metal bearing water.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
09:23Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Volatilization
Adsorption Isotherms I
Microbial Bioremediation of Uranium
Adsorption Isotherms II
Ladder Diagrams: Complexation Equilibria
The formation constant, K1, for the formation of Cd(NH3)2+ complex from cadmium and ammonia is 3.55 × 102. Log K1 (i.e. pNH3) is 2.55, and...