Related Experiment Video
Updated: Jun 23, 2026
Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers
Published on: June 30, 2018
Preparation of gamma-APS monolayer with complete coverage via contact printing
Fevzihan Basarir1, Tae-Ho Yoon
1Program for Integrated Molecular Systems, Department of Materials Science and Engineering, Gwangju Institute of Science and Technology, 1 Oryong-dong, Buk-gu, Gwangju 500-712, Republic of Korea.
Abstract:
A monolayer film of 3-aminopropyltriethoxysilane (gamma-APS) was prepared by contact printing with featureless PDMS stamp. First, gamma-APS ink solutions in dry toluene were prepared in a dry nitrogen-filled glove box and immediately used for spin coating onto a PDMS stamp, followed by printing on a silicon wafer. Next, water contact angles and film thicknesses were measured as a function of ink concentration (5-100 mM) and printing time (1-60 min) after printing, as well as after aging in toluene for 24 h. In addition, surface coverage, topology, RMS roughness and surface amine density were also evaluated, while the chemical structure of gamma-APS monolayer was analyzed by FT-IR/ATR. Optimum conditions for gamma-APS monolayer with complete coverage were determined to be ink concentration of 20 mM and printing time of 30 min, which resulted in a water contact angle of 93 degrees, film thickness of 0.78 nm and surface amine density of 7.6 molecules/nm(2).
