Related Experiment Video
Updated: Jun 23, 2026

Generation of Zerovalent Metal Core Nanoparticles Using n-(2-aminoethyl)-3-aminosilanetriol
Published on: February 11, 2016
Enhanced reduction of nitrate by supported nanoscale zero-valent iron prepared in ethanol-water solution
Heesu Park1, Yong-Min Park, Soo-Kyeong Oh
1Center for Environmental Technology Research, Korea Institute of Science and Technology, Seoul, South Korea.
Abstract:
Nanoscale zero-valent iron is famous for its high reactivity originating from its high surface area, and has emerged as an extension of granular zero-valent iron technology. Due to its extremely small size, nanosized iron cannot be used as a medium in a permeable reactive barrier system, which is the most popular application of granular iron. To overcome this shortcoming, supported nanoscale zero-valent iron was created. In addition to this, the preparation solution was modified to enhance the reactivity. An ethanol/water solvent containing a dispersant of polyethylene glycol was used to synthesize nanoscale iron. This preparation was done in the presence of an ion-exchange resin as a supporting material. Nanoscale zero-valent iron was formed and bound to the granular resin at the same time through the borohydride reduction of an iron salt, and the resulting product was compared with that prepared in a conventional way of using water only. Switching the preparation solution increased the supported nanoscale iron's BET surface area and Fe content from 31.63 m2 g(-1) and 18.19 mg Fe g(-1) to 38.10 m2 g(-1) and 22.44 mg Fe g(-1), respectively. Kinetic analysis from batch tests revealed that a higher denitrification rate was achieved by the supported nanoscale zero-valent iron prepared in the modified way. The pseudo-first-order reaction constant of 0.462 h(-1) suggested that the reactivity of the supported iron, prepared in ethanol/water, increased by 61% compared with the one prepared in water. The higher rates of reaction, based on higher specific area and iron content, suggest that this new supported nanoscale iron can be used successfully for permeable reactive barriers.
Related Concept Videos
Preparation of Amines: Reduction of Oximes and Nitro Compounds
Though catalytic hydrogenation can reduce nitrobenzenes, the reduction is nonselective in the presence of other functional groups. For instance, if nitrobenzene contains an aldehyde group,...
2° Amines to N-Nitrosamines: Reaction with NaNO2
Nitriles to Amines: LiAlH4 Reduction
As shown below, the mechanism involves three steps. Firstly, the hydride ion acting as a nucleophile attacks the nitrile carbon to form an anion. In the second step, a second equivalent of the hydride ion attacks the anion to...
Preparation of Amines: Reduction of Amides and Nitriles
Amides can be reduced to primary, secondary, and tertiary amines using catalytic hydrogenation, active metals like Fe,...

