Related Experiment Video
Updated: Jun 23, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Decreasing sulfide generation in sewage by dosing formaldehyde and its derivatives under anaerobic conditions
L Zhang1, B De Gusseme, P De Schryver
1Laboratory of Microbial Ecology and Technology, Ghent University, Ghent, Belgium. lezhanghua@hotmail.com
Abstract:
Hydrogen sulfide emission in sewers is associated with toxicity, corrosion, odour nuisance and high costs. In this study, a new method to inhibit sulfide generation by means of formaldehyde and its derivatives has been evaluated under anaerobic conditions. The possible impact of formaldehyde on an activated sludge system and an appraisal of the economic aspects are presented as well. A dosage of 19 mg L(-1) formaldehyde resulted in a decrease of the sulfide production of 90%. Dosing of 32 mg L(-1) paraformaldehyde and addition of 111 mg L(-1) ureaformaldehyde were not sufficient to inhibit the sulfide generation in sewage to the same extent. The impacts of 19 mg L(-1) formaldehyde on activated sludge, in terms of COD removal, nitrification rate and oxygen uptake rates, were negligible. This suggests that formaldehyde dosage is a feasible technique to abate the sulfide problem in sewers.
More Related Videos
07:34Biogas Purification through the use of a Microalgae-Bacterial System in Semi-Industrial High Rate Algal Ponds
Published on: March 22, 2024
06:52Experimental Column Setup for Studying Anaerobic Biogeochemical Interactions Between Iron (Oxy)Hydroxides, Trace Elements, and Bacteria
Published on: December 19, 2017
Related Concept Videos
Acid Mine Drainage
Biological Treatment of Effluent and Waste Water
Preparation and Reactions of Sulfides
Microbes and the Sulfur Cycle
Microbial Wastewater Treatment
Microbial Corrosion