Endotracheal temperature and humidity measurements in laryngectomized patients: intra- and inter-patient variability
R J Scheenstra1, S H Muller, A Vincent
1Department of Head and Neck Oncology and Surgery, The Netherlands Cancer Institute, Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX, Amsterdam, The Netherlands.
Unlabelled:
This study assesses intra- and inter-patient variability in endotracheal climate (temperature and humidity) and effects of heat and moister exchangers (HME) in 16 laryngectomized individuals, measured repeatedly (N = 47). Inhalation Breath Length (IBL) was 1.35 s without HME and 1.05 s with HME (P < 0.0001). With HME, end-inspiratory (minimum) humidity values increased 5.8 mg H(2)O/L (P < 0.0001) and minimum temperature values decreased 1.6 degrees C (P < 0.0001). For the temperature and humidity minimums, the inter-patient variability was much smaller than the short- and long-term intra-patient variability. For exhalation breath length and full breath length, the opposite was the case.
Conclusions:
(1) Because inter-patient variability is smaller than intra-patient variability, investigating endotracheal climate in a limited number of laryngectomized subjects is justified, provided repeated measurements per patient are accomplished; (2) main contributor to intra-patient variability is the positioning of the catheter tip in the trachea; (3) an HME leads to a shortened IBL which enhances the HME effect.
Related Concept Videos
Endotracheal Tube Extubation
Procedure
Extubation removes the endotracheal tube (ETT) from the patient on mechanical ventilation. It requires a well-coordinated, multidisciplinary approach involving physicians, nurses, respiratory therapists, and other healthcare professionals.
Endotracheal Intubation I: Procedure
The ET tube comprises various components, including a standard adaptor to attach a bag-valve-mask (BVM) or ventilator, a cuff, a pilot balloon, and radiopaque markings along its length to measure the insertion distance. The tube sizes...
Temperature Measurement Sites
Oral: When assessing oral temperature, the thermometer tip should be placed under the tongue in the posterior sublingual pocket. It offers accurate readings and can be...
Tracheostomy Care II: Procedure
Step 1: Perform hand hygiene, and put on personal protective equipment: gown, gloves, mask and...
Tracheostomy: Procedure and Tubes
Tracheostomy tubes can be made of semiflexible plastic (polyurethane or silicone), rigid plastic, or metal, and they come in...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...


