Related Experiment Video
Updated: Jun 22, 2026

Writing Bragg Gratings in Multicore Fibers
Published on: April 20, 2016
Grating-free nth order cascaded Raman fibre lasers using highly Ge-doped low loss fibre
Abstract:
Pumped by a narrow band Nd(3+)-doped fibre laser, a grating-free three-wavelength Raman fibre laser has been demonstrated. More than 1.3W output power at the third Stokes line of 1230 nm, a bandwidth of 1.8nm and a slope efficiency of ~28% was measured. A four-wavelength Raman fibre laser was also demonstrated using a different resonator that consisted of a 4% fibre end reflector, a dielectric mirror and a single fibre Bragg grating. This method is simple, versatile and cheap compared with conventional methods employing fibre Bragg gratings used to resonate all Stokes wavelengths.
More Related Videos
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
13:02Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation
Published on: February 25, 2017