Related Experiment Video
Updated: Jun 22, 2026

Compact Lens-less Digital Holographic Microscope for MEMS Inspection and Characterization
Published on: July 5, 2016
Estimation of multiple phases in holographic moiré in presence of harmonics and noise using minimum-norm algorithm
Abstract:
The paper proposes a novel approach for estimating multiple phases in holographic moiré. The need to design such an algorithm is necessitated by the development of optical configurations containing two phase stepping devices, e.g. PZTs, with a view to measure simultaneously two phase distributions. The approach consists of first applying minimum-norm algorithm to extract phase steps imparted to the PZTs. Salient feature of the algorithm lies in its ability to handle nonsinusoidal waveforms and noise. This approach also provides the flexibility of using arbitrary phase steps, a feature most commonly attributed to generalized phase shifting interferometry. Once the phase steps are estimated for each PZT, the Vandermonde system of equations is designed to estimate the phase distributions.
Related Concept Videos
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear.
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length, the...
Harmonic Mean
Take the example of the speed of a car, which is the measure of the rate of distance traveled. If the vehicle traverses the same distance back-and-forth, its average speed equals the total distance traveled divided by the total time taken. However, if the car moves with varying speeds, then the arithmetic mean is more skewed...
IR Spectrum Peak Splitting: Symmetric vs Asymmetric Vibrations
One-Compartment Open Model: Wagner-Nelson and Loo Riegelman Method for ka Estimation
On...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...

