Related Experiment Video
Updated: Jun 22, 2026

Deposition of Porous Sorbents on Fabric Supports
Published on: June 12, 2018
Biosorption characteristics of phosphates from aqueous solution onto Phoenix dactylifera L. date palm fibers
Khalifa Riahi1, Béchir Ben Thayer, Abdallah Ben Mammou
1Laboratoire de Chimie & Qualité des Eaux, Département d'Aménagement & Environnement, Ecole Supérieure des Ingénieurs de l'Equipement Rural, Medjez El Bab 9070, Tunisia.
Abstract:
Phosphates are very important basic materials in agricultural and other industrial applications. The removal of phosphates from surface waters is generally necessary to avoid problems, such as eutrophication, particularly near urban areas. This paper is focused on the sorption of PO4(3-) ions from aqueous solution onto date palm fibers as a raw, natural and abundantly materials. A series of batch tests were conducted and the influence of contact time, initial phosphate concentration, pH of the solution and adsorbent dosage on PO4(3-) specie removal was investigated. FT-IR spectroscopy, scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM) analysis of the date palm fibers before and after phosphates biosorption and desorption studies were investigated to confirm the mechanism of the retention of phosphates. Results indicate that PO4(3-) uptake increased with increased initial phosphate concentration and decreased with increased pH values. The results showed that the highest phosphates adsorption capacity (4.35 mg/g) was found at pH 6.8, for an adsorbent dosage of 6g/L, initial phosphate concentration of 50mg/L, under a constant temperature of 18 degrees C+/-02, and the equilibrium state was reached within 120 min of exposure time. The relatively low cost and high capabilities of date palm fibers make them potentially attractive adsorbents for the removal of phosphate from aqueous solution.
Related Concept Videos
Bioplastics
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
The Phosphorus Cycle
