Related Experiment Video
Updated: Jun 22, 2026

Façade-Level Monitoring of CO2 Variability under Urban Heat Island Conditions using Low-Cost Sensor Data Loggers
Published on: December 12, 2025
Urban temperatures in Hong Kong: thermal environmental safety and implications for city planning
Tor Chiu1, Pauline Wong, Stephanie Lam
1Department of Surgery, Division of Plastic and Reconstructive Surgery, The Chinese University of Hong Kong, Prince of Wales Hospital, Shatin, Hong Kong.
Abstract:
Cutaneous thermal injury caused by direct contact with objects heated solely by sun exposure is rare. We undertook to investigate factors that may influence the temperature of sun-exposed objects at the ground level. Two clinical cases of burns caused by contact with sun-exposed objects are described. Surface temperatures on a citywide scale were determined from satellite thermal images. Ground level surface temperatures of a variety of objects were measured using an infrared thermometer. The satellite thermal image demonstrated local surface temperature differences (of more than 10.6 degrees C variation) and the temperature at the places of study (8.5-9.5 degrees C above background). Infrared thermometer readings demonstrated that the surface temperature of a sun-exposed black car could be as high as 75.0 degrees C (range, 71-78 degrees C) compared with 44.6 degrees C (42.2-47.3 degrees C) for a white car, and shading significantly reduced the surface temperatures of exposed objects (10.4-48.1%). The risk of injury is related to the effects of city planning on urban temperatures, of material color, composition, and shade on the ground level temperatures, and to the rise in global temperatures because of greenhouse-induced warming. The combined effect means that in a modern subtropical city such as Hong Kong, a substantial percentage of the urban area may have summertime surface temperatures that are high enough to constitute a health hazard. We recommend that this potential cause of harm to health be taken into account during urban planning.
Related Concept Videos
Properties of Limits in Multivariable Calculus
Factors Affecting Body Temperature
Factors may include:
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in temperature (ΔT) is 55 °C.
Hot Weather Concreting
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
Homeostatic Imbalances in Body Temperature
Global Climate Change
