Related Experiment Video
Updated: Jun 22, 2026

Preparation and Testing of Plant Seed Meal-based Wood Adhesives
Published on: March 5, 2015
Sealing ability of three fiber dowel systems
Virgínia Santos1, Jorge Perdigão, George Gomes
1Department of Removable Prosthodontics, University of Lisbon School of Dentistry, Lisbon, Portugal.
Purpose:
To study the sealing ability of two new fiber dowel systems.
Materials And Methods:
Thirty-six extracted single-rooted teeth were endodontically treated and randomly assigned to two new fiber dowel systems and a control group: (1) an E-glass-based dowel, everStick-POST, cemented with ParaCem Universal DC resin cement (EV); (2) a glass-fiber dowel, RelyX Fiber Post, cemented with RelyX Unicem self-adhesive resin cement (RX). The control group was restored with a glass-fiber dowel, ParaPost Fiber Lux, cemented with ParaCem Universal DC resin cement (PP). The roots were isolated and immersed in a 50 wt% ammoniacal silver nitrate solution for 24 hours followed by 8 hours in a photo-developing solution. The roots were sectioned in 1-mm-thick disks perpendicular to the long axis of the root. The specimens were processed for backscattered FESEM observation. For each tooth, the depth of silver infiltration into the root canal was measured by ranks from 0 to 8. For each disk, silver infiltration was measured as the percentage of leakage around the adhesive interface. Data were analyzed with Kruskal-Wallis nonparametric tests at a significance level of 95%.
Results:
When the silver infiltration was computed from the coronal to the apical aspects of the root, RX resulted in the lowest degree of silver infiltration, but not statistically different from that of EV (p < 0.148). RX, however, resulted in a lower depth of silver infiltration than the control group PP at p < 0.023. EV resulted in a statistically similar depth of penetration to PP (p= 0.492). Although the total mean percentage of silver infiltration at the dentin-resin cement interface was statistically similar for all groups (p= 0.632), EV resulted in the greater number of disks with silver infiltration (23 out of 96), followed by PP (21 out of 96) and RX (14 out of 96). None of the specimens showed leakage around the dowel-resin cement interface.
Conclusion:
The use of the E-glass dowels in EV did not improve the root-wall sealing ability compared with the control group PP. The system RX, which uses a new simplified self-adhesive protocol, resulted in a lower depth of silver infiltration than the control group PP.
Related Concept Videos
Fiber Reinforced Concrete
Wood Fasteners
Nails are the most common fasteners, consisting of sharp-pointed metal pins that are driven into wood using a hammer or a mechanical nail gun. They come in a variety of diameters, heads, and lengths. Nailing techniques include...
Types of Building Separation Joints
Volume-change joints address the effects of expansion and contraction due to temperature and moisture variations. They are strategically placed at discontinuities in a building's mass where cracking is most likely and are spaced about 150 to 200 feet...
Steel Fastening Techniques
Rivets are cylindrical steel fasteners with a specially designed head. During application, rivets are heated until white-hot and then inserted through pre-drilled holes in the steel sections. A pneumatic hammer is used to shape the exposed end into a second head, securing the sections together.
Bolting is another...
Posttensioned Masonry Walls
Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...
Composite Masonry Walls

