Related Experiment Video
Updated: Jun 22, 2026

Analyzing the Photo-oxidation of 2-propanol at Indoor Air Level Concentrations Using Field Asymmetric Ion Mobility Spectrometry
Published on: June 14, 2018
Multipass membrane air-stripping (MAS) for removing volatile organic compounds (VOCs) from surfactant micellar
Hefa Cheng1, Yuanan Hu, Jian Luo
1Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94025, USA. hefac@umich.edu
Abstract:
Air-stripping is one of the most effective technologies for removing volatile organic compounds (VOCs) from surfactant solutions, although the presence of surfactant poses some unique challenges. This study evaluated the effect of a mixed surfactant system on the apparent Henry's law constant of tetrachloroethylene (PCE) and the efficiency of PCE removal from surfactant solutions using a lab-scale hollow fiber membrane contactor. Results show that the presence of surfactant significantly reduced the apparent Henry's law constant of PCE, and the reduction was proportional to the total surfactant concentration. PCE removal efficiency by membrane air-stripping (MAS) decreased as the surfactant system transitioned from solubilization to supersolubilization. Besides significantly reducing the apparent volatility of VOCs, the presence of surfactant brings additional mass transfer resistance in air-stripping, which makes it difficult to achieve high levels of contaminant removal, even at very high air/liquid (A/L) ratios. In contrast, multipass/multistage MAS operated at low A/L ratios could achieve near 100% contaminant removal because of less mass transfer limitation during each stripping pass/stage. Experimental results, together with model calculations demonstrate multipass (and multistage) air-stripping as a cost-effective alternative for removing VOCs from surfactant micellar solutions compared to the options of using large air strippers or operating at high A/L ratios.
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
¹³C NMR: ¹H–¹³C Decoupling
A broadband decoupling technique is used to simplify these complex, sometimes overlapping, signals. Broadband decoupling relies on a...
