Related Experiment Video
Updated: Jun 22, 2026

High-Contrast and Fast Photorheological Switching of a Twist-Bend Nematic Liquid Crystal
Published on: October 31, 2019
Characterization of a nematic PALC at large oblique incidence angles
Abstract:
Compared with conventional photometric methods of measuring cell parameters, including the cell gap and the pretilt angle of a nematic parallel-aligned liquid crystal (PALC) using multiple wavelengths at normal incidence, this research proposes the use of a phase-sensitive interferometric ellipsometer to determine cell parameters precisely based on a single wavelength at large oblique incidence angles. The advantage of this method is that it detects the phase difference using an optical heterodyne interferometer in which a common phase noise rejection mode is provided. Thus, there is a high signal-to-noise ratio (SNR) on the phase measurement. In addition, a range of large oblique incidence angles on the PALC is used so that a high sensitivity measurement of the cell parameters is obtained experimentally. During the measurements, the multiple reflections and spatial shifting effect of the emerging extraordinary ray (E-ray) and ordinary ray (O-ray) from the PALC at large oblique incidence angles are able to be reduced effectively by the use of retro-reflected geometry in the interferometer. The experimental results verify that the sensitivities for the cell gap and pretilt angle measurements are 0.3 nm and 0.01 degrees , respectively.
More Related Videos
Related Concept Videos
Unsymmetric Bending - Angle of Neutral Axis
When a bending moment is applied at an angle θ concerning the vertical axis of a symmetrical member, it can be resolved into components along the member's principal centroidal axes. The...
Contact Angle
The adhesive force is the molecular force between molecules of different materials, that is, between the molecules of the solid and the liquid. The cohesive force...
Two-Dimensional Force System
Potential Due to a Polarized Object
Curvilinear Motion: Normal and Tangential Components
The positive direction of the t-axis aligns with the increasing position of the car along the curved path, denoted by the unit vector ut. Simultaneously, the n-axis, perpendicular to the t-axis, dissects the curved path into differential arc segments, each forming the arc of a circle with a radius of...
Two-Dimensional Force System: Problem Solving
The first step to solving a two-dimensional force system problem is to draw a free-body diagram of the object under consideration. This diagram helps identify all the external forces acting on the object, including their...

