Related Experiment Video
Updated: Jun 22, 2026

Transmission of Multiple Signals through an Optical Fiber Using Wavefront Shaping
Published on: March 20, 2017
Frequency upconversion of multiple RF signals using optical carrier suppression for radio over fiber downlinks
Abstract:
We propose and analyze a technique of an optical carrier transmitting two RF signals using optical carrier suppression. A single optical Mach-Zehnder modulator is used for both optical carrier suppression and signal modulation, and optical carrier suppression modulation is also used for frequency conversion of RF signals. This work shows that in contrary to the case of an optical carrier transmitting a single RF signal with optical carrier suppression where stronger optical carrier suppression improves the upconverted RF signal, weaker optical carrier suppression is preferred for an optical carrier transmitting two RF signals due to nonlinear distortion because the nonlinear distortion is reduced by using weaker optical carrier suppression. We find that the usable range of optical carrier suppression ratio is from 10 to 18 dB for RF signal upconverted to 20 GHz and beyond, and the best optical carrier suppression ratio is around 10 dB. We verify the concept and analysis with experiment. In experiment, we used two RFs at 6 and 18 GHz transmitting two 750 Mb/s signals. The experiment for the first time demonstrated that an optical carrier can transmit two RF signals using optical carrier suppression and showed that upconverted RF signals are degraded by nonlinear distortion, particularly for upconverted RF signal at 12 GHz, i.e. the RF signal at the lower frequency.
Related Concept Videos
Upsampling
Properties of Fourier Transform I
In radio broadcasting, multiple audio signals often need to be transmitted simultaneously. The Fourier...
Downsampling
The Fourier transform of the decimated sequence reveals a combination of scaled and shifted versions of the original spectrum. This...
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
