Related Experiment Video
Updated: Jun 22, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Efficiency of succinylated-olive stone biosorbent on the removal of cadmium ions from aqueous solutions
Abdellah Aziz1, El Hadj Elandaloussi, Belkacem Belhalfaoui
1Laboratoire de Valorisation des Matériaux, Université Abdelhamid Ibn Badis, 27000 Mostaganem, Algeria.
Abstract:
Chemical functionalization of olive stone wastes with succinate linkers can potentially improve the performance of wastewater treatment technologies via enhanced adsorption and high affinity of the covalently attached succinate groups for heavy metals. In this study, a novel reusable adsorbent material based on agricultural waste has been synthesized by esterifying the lignocellulosic matrix of olive stones with succinic anhydride in toluene under basic conditions. Characterization of the as-prepared material by FTIR and solid-state MAS (13)C NMR spectroscopies and TGA confirmed that the heterogeneous esterification has proceeded very efficiently to yield the succinylated-olive stone (S-OS). Subsequent alkaline treatment of S-OS with saturated NaHCO(3) aqueous solution led to the resulting sodic material (NaS-OS), which was subjected to batch experiments in order to evaluate its cadmium-removing efficiency from aqueous solutions at realistic concentrations of cadmium found in industrial effluents. The results obtained from the sorption characteristics have revealed that NaS-OS material is highly effective in removing cadmium from aqueous solutions, with a maximum uptake capacity of 200 mg g(-1) (1.78 mmol g(-1)). The Langmuir isotherm model was found to fit adequately the equilibrium isotherm data. Cadmium adsorption occurs rapidly and the adsorption mechanism is a chemical sorption via ionic exchange between the adsorbate and adsorbent. Thermodynamic parameters were also evaluated from the effect of temperature studies. Regenerability of NaS-OS material was ascertained by quantitative desorption of cadmium with 1M aqueous NaCl and the reusability of the matrix after five repeated cycles led to nearly no attenuation in its performance (less than 2% in the sorption capacity), indicating that repeated use of NaS-OS is quite feasible. Compared to other low-cost adsorbents utilized for the removal of Cd(II) from water/wastewater, NaS-OS shows higher sorption capacity. These results have important implications for the design of low-cost adsorbents based on agricultural wastes.
More Related Videos
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Related Concept Videos
Extraction: Advanced Methods
Precipitation and Co-precipitation
Factors Affecting Solubility