Related Experiment Video
Updated: Jun 22, 2026

MRM Microcoil Performance Calibration and Usage Demonstrated on Medicago truncatula Roots at 22 T
Published on: January 16, 2021
An optimized solenoidal head radiofrequency coil for low-field magnetic resonance imaging
Barbara Blasiak1, Vyacheslav Volotovskyy, Charlie Deng
1Institute of Nuclear Physics, Polish Academy of Sciences, Krakow 31-342, Poland.
Abstract:
Applications of low-field magnetic resonance imaging (MRI) systems (<0.3 T) are limited due to the signal-to-noise ratio (SNR) being lower than that provided by systems based on superconductive magnets (> or = 1.5 T). Therefore, the design of radiofrequency (RF) coils for low-field MRI requires careful consideration as significant gains in SNR can be achieved with the proper design of the RF coil. This article describes an analytical method for the optimization of solenoidal coils. Coil and sample losses are analyzed to provide maximum SNR and optimum B(1) field homogeneity. The calculations are performed for solenoidal coils optimized for the human head at 0.2 T, but the method could also be applied to any solenoidal coil for imaging other anatomical regions at low field. Several coils were constructed to compare experimental and theoretical results. A head magnetic resonance image obtained at 0.2 T with the optimum design is presented.
Related Concept Videos
Magnetic Field of a Solenoid
Consider a solenoid with 100 turns wrapped around a cylinder of...
Magnetic Resonance Imaging
Solenoids
Each turn in a solenoid can be approximated as a circular current carrying coil that generates a dipole moment. The...
Atomic Nuclei: Magnetic Resonance
NMR Spectrometers: Radiofrequency Pulses and Pulse Sequences
NMR Spectrometers: Resolution and Error Correction

