Related Experiment Video
Updated: Jun 21, 2026
Imaging of the Microstructural Failure Mechanism in the Human Hip
Published on: September 29, 2023
Mixed-mode fracture of human cortical bone
Elizabeth A Zimmermann1, Maximilien E Launey, Holly D Barth
1Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA.
Abstract:
Although the mode I (tensile opening) fracture toughness has been the focus of most fracture mechanics studies of human cortical bone, bones in vivo are invariably loaded multiaxially. Consequently, an understanding of mixed-mode fracture is necessary to determine whether a mode I fracture toughness test provides the appropriate information to accurately quantify fracture risk. In this study, we examine the mixed-mode fracture of human cortical bone by characterizing the crack-initiation fracture toughness in the transverse (breaking) orientation under combined mode I (tensile opening) plus mode II (shear) loading using samples loaded in symmetric and asymmetric four-point bending. Whereas in most structural materials, the fracture toughness is increased with increasing mode-mixity (i.e., where the shear loading component gets larger), in the transverse orientation of bone the situation is quite different. Indeed, the competition between the maximum applied mechanical mixed-mode driving force and the weakest microstructural paths in bone results in a behavior that is distinctly different to most homogeneous brittle materials. Specifically, in this orientation, the fracture toughness of bone is markedly decreased with increasing mode-mixity.
Related Concept Videos
01:27Fractures: Bone Repair
Minor fractures with no bone displacement are treated by immobilizing the fractured bone using a cast or splint. However, in the case of fractures with displaced bones, the broken bones are repositioned before immobilization to ensure successful healing without deformation and loss of function. The realignment of fractured bone ends is performed through a process called reduction. If the procedure...
01:22Sutures of the Skull
Sutures are immobile joints between adjacent bones of the skull. The narrow gap between the bones is filled with dense, fibrous connective tissue that unites the bones. The long sutures located between the skull bones are not straight but instead follow irregular, tightly twisting paths. These twisting lines tightly...
01:27Compact Bone
Compact bone, also called cortical bone, is the denser, stronger of the two types of bone tissue. It is found under the periosteum and in the diaphyses of long bones, where it provides support and protection. The microscopic structural unit of compact bone is called an osteon, or haversian system. Each osteon is composed of concentric rings of calcified...
01:09Spongy Bone
Spongy bone is more porous, and less dense compared to compact bone. It is composed of concentric lamellae that are arranged irregularly to form the trabecular network. In some bones, the spaces between trabeculae contain red marrow, where...
01:17Gross Anatomy of Bone
The diaphysis is the tubular shaft that runs between the proximal and distal ends of the bone. The walls of the diaphysis are composed of dense and hard compact bone made of numerous osteons — the functional unit of the compact bone. The hollow region in the diaphysis is called the medullary cavity, which harbors the bone marrow. In infants and children, this marrow cavity is filled with red marrow, whereas in adults, it...