Related Experiment Video
Updated: Jun 21, 2026

Continuously-stirred Anaerobic Digester to Convert Organic Wastes into Biogas: System Setup and Basic Operation
Published on: July 13, 2012
Buffer requirements for enhanced hydrogen production in acidogenic digestion of food wastes
Heguang Zhu1, Wayne Parker, Robert Basnar
1Aquatic Ecosystems Management Research Division, Water Science and Technology, Environment Canada, 867 Lakeshore Road, P.O. Box 5050, Burlington, Ontario, Canada L7R 4A6. hzhu@biorem.biz
Abstract:
The requirements for pH buffer addition for hydrogen production and acidogenesis in batch acidogenic digestion of a food waste (FW) feedstock with limited alkalinity was studied at various initial pH conditions (6.0-8.0). The results showed that, without buffer addition, hydrogen production from this feedstock was insignificant regardless of the initial pH. With buffer addition, hydrogen production improved significantly if the initial pH was greater than 6.0. Substantial hydrogen production occurred when the pH at the end of the batch digestion was higher than 5.5. The maximum hydrogen production was found to be 120 mL/g VS added when the initial pH was 6.5 and buffer addition was in the range of 15-20 mmol/g VS. The effect of pH buffering on the formation of volatile fatty acids (acetic acid, propionic acid and butyric acid) was similar to its effect on hydrogen production. The results of this study clearly indicated shifts in the metabolic pathways with the pH of fermentation. The changes in metabolic pathways impacted upon the dosage of buffer that was required to achieve maximum hydrogen generation.
More Related Videos
Related Concept Videos
Production of Organic Acids
Titration of a Weak Base with a Strong Acid
Using the ICE table and substituting the Kb value, we calculate the initial pH of 50 mL of 0.1 M ammonia to be 11.11. Addition of 25 mL of 0.1 M hydrochloric acid to this solution of ammonia results in a buffer with an equal concentration of ammonia and ammonium ions. The pH of this buffer can be calculated by substituting these...
Buffers
Microbial Wastewater Treatment
Microbial Bioremediation of Hydrocarbons
Biofuels

