Related Experiment Video
Updated: Jun 21, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Extraction behavior of As, Pb, and Zn from mine tailings with acid and base solutions
Jung-Seok Yang1, Ju Young Lee, Kitae Baek
1Korea Institute of Science and Technology-Gangneung Institute, Gangneung 210-340, Republic of Korea.
Abstract:
The aim of this study was to investigate the extraction behavior of As, Pb, and Zn from mine tailings for considering the feasibility of soil washing. Extraction of metals was studied for different extractant doses, solid/liquid ratios, and equilibrium times. Generally, high extraction efficiency was achieved with HCl, H(3)PO(4), and H(2)SO(4), while H(2)SO(4) proved to be problematic with respect to Pb. NaOH was found to be favorable in removing As, while it was not effective at extracting Pb and Zn. With optimum conditions, which were a 1:5 solid-liquid ratio and 2h of extraction time, 0.5M of HCl extracted 21.1-72.5%, 9.9-86.5%, and 6.1-74.1% of As, Pb, and Zn, respectively. The power and Elovich function were adequate to describe adsorption kinetics. These results suggest that HCl and NaOH could be used to effectively extract all metals without selectivity and As with selectivity, respectively, in mine tailings and could be used for the design of soil washing process.
More Related Videos
05:52Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Extraction: Advanced Methods
Microbial Leaching
Acid Mine Drainage
Precipitation and Co-precipitation
Electrodeposition
Electrodeposition can...
Microbial Bioremediation of Uranium