Related Experiment Video
Updated: Jun 21, 2026

Sample Preparation for Single Cell Mass Spectrometry Metabolomics Studies: Combined Cell Washing, Quenching, Drying, and Storage
Published on: September 16, 2025
Fixation and drying protocols for the preparation of cell samples for time-of-flight secondary ion mass spectrometry
Jakob Malm1, Dimitrios Giannaras, Mathis O Riehle
1Chemistry and Materials Technology, SP Technical Research Institute of Sweden, P.O. Box 857, SE-501 15 Borås, Sweden.
Abstract:
Time-of-flight secondary ion mass spectrometry (TOF-SIMS) is a promising tool for subcellular chemical analysis of biological cells. However, to obtain relevant information, the method used for sample preparation is critical. In this work, we have used TOF-SIMS, scanning electron microscopy (SEM), and interference reflection microscopy (IRM) to study the effects of different fixation and drying methods on the morphology and chemical structure of human fibroblast cells (hTERT) adhered to a silicon surface. Specifically, two fixation techniques (chemical fixation with glutaraldehyde and cryofixation by plunge freezing) and two drying techniques (freeze drying and alcohol substitution drying) were investigated. Cryofixation followed by freeze drying was determined to produce dried cells with preserved cell morphology, intact cell membranes, and retained sodium/potassium ion concentration gradients across the plasma membrane. By washing samples in an aqueous solution of ammonium formate (AF) before cryofixation, the accumulation of salts on the sample surface during drying could be suppressed. IRM measurements showed that the cell morphology was preserved during washing with ammonium formate, although some swelling occurred. Compared with cryofixation, cells fixed with glutaraldehyde showed finer structures on the cell surface in SEM and similar lipid distributions in TOF-SIMS, but the sodium/potassium ion gradients were not retained. Alcohol drying was determined to remove cell membrane phospholipids significantly, although the use of osmium tetroxide as a post-fixative was shown to decrease this effect.
More Related Videos
09:58Preparation of Prokaryotic and Eukaryotic Organisms Using Chemical Drying for Morphological Analysis in Scanning Electron Microscopy (SEM)
Published on: January 7, 2019
08:16Optimal Preparation of Formalin Fixed Samples for Peptide Based Matrix Assisted Laser Desorption/Ionization Mass Spectrometry Imaging Workflows
Published on: January 16, 2018
Related Concept Videos
Preparation of Samples for Electron Microscopy
Fixation and Sectioning
The simplest type of preparation is the wet mount, in which the specimen is placed in a drop of liquid on the slide. A liquid specimen can be directly deposited on the slide using a dropper. Solid specimens, such as skin scraping, can be placed on the slide before adding a drop of liquid to prepare the wet mount. Sometimes the liquid is simply water, but stains are often added...