A simple and portable breathing circuit designed for ventilatory muscle endurance training (VMET)

Ventilatory muscle endurance training (VMET) involves increasing minute ventilation (V (E)) against a low flow resistance at rest to simulate the hyperpnea of exercise. Ideally, VMET must maintain normocapnia over a wide range of V (E). This can be achieved by providing a constant fresh gas flow to a sequential rebreathing circuit. The challenge to make VMET suitable for home use is to provide a source of constant fresh gas flow to the circuit without resorting to compressed gas.

Our VMET circuit was based on a commercial sequential gas delivery breathing circuit (Pulmanex Hi-Ox, Viasys Healthcare, Yorba Linda, CA USA). Airflow was provided either by a small battery-driven aquarium air pump or by the entrainment of air down a pressure gradient created by the recoil of a hanging bellows that was charged during each inhalation. In each case, fresh gas flow was adjusted to be just less than resting V (E). Eight subjects then breathed from the circuit for three 10min periods consisting of relaxed breathing, breathing at 20 and then at 40L/min. We monitored V (E), end-tidal PCO2 (PetCO2) and hemoglobin O2 saturation (SpO2).

During hyperpnea at 20 and 40L/min, PetCO2 did not differ significantly from resting levels with either method of supplying fresh gas. SpO2 remained greater than 96% during all tests.

Isocapnic VMET can be reliably accomplished with a simple self-regulating, sequential rebreathing circuit without the use of compressed gas.