Related Experiment Video
Updated: Jun 20, 2026

Designed for Molecular Recycling: A Lignin-Derived Semi-aromatic Biobased Polymer
Published on: November 30, 2020
Identifying the phase behavior of biodegradable poly(hexamethylene succinate-co-hexamethylene adipate) copolymers
Xiangyang Li1, Zhenfei Hong, Jie Sun
1National Synchrotron Radiation Laboratory and Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, China.
Abstract:
Whether a phase separation or a cocrystallization occurs in poly(hexamethylene succinate-co-hexamethylene adipate) (P(HS-co-HA)) copolymers was studied with a combination of wide-angle X-ray diffraction (WAXD) and Fourier transform infrared (FTIR) spectroscopy. With HA as the majority, the presence of HS comonomers leads to weakening and broadening of (10l) peaks in the X-ray fiber diffraction patterns, while a crystal structure similar to PHS is formed in the copolymer with HS as the majority. The X-ray diffraction patterns imply possible cocrystallization between HS and HA comonomers, but cannot lead to an unambiguous conclusion, which was clarified with the compensative tool of FTIR. Following the characteristic absorption bands of crystals, cocrystallization of HS and HA comonomers was observed in copolymers with HA comonomer as the majority during which HA initiated the nucleation at high temperatures. With HA as minority, cocrystallization of HS and HA can still be achieved with a fast quenching to below 0 degrees C, while a phase separation occurs and only HS comonomer crystallizes at high temperatures. This demonstrates that P(HS-co-HA) has an asymmetric phase diagram. Because of the sensitivity to local conformations, FTIR spectroscopic method is demonstrated to be a powerful tool on study phase behaviors of polymers with similar crystal structure.
Related Concept Videos
Bioplastics
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Classification and Mechanical Properties of Synthetic Polymers
Step-Growth Polymerization: Overview
Many natural and synthetic polymers are produced by...
Characteristics and Nomenclature of Copolymers

