Related Experiment Video

Updated: Mar 1, 2026

Author Spotlight: Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon
07:22

Author Spotlight: Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon

Published on: February 3, 2023

8.5K

Axis-alignment method for arc-fusion splice of single-mode fiber using a beam splitter

K Imon, M Tokuda

    Optics Letters
    |September 1, 2009
    PubMed

    More Related Videos

    Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy08:48

    Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy

    Published on: November 22, 2019

    8.1K
    High-speed Continuous-wave Stimulated Brillouin Scattering Spectrometer for Material Analysis07:55

    High-speed Continuous-wave Stimulated Brillouin Scattering Spectrometer for Material Analysis

    Published on: September 22, 2017

    10.7K

    Related Concept Videos

    Shear on the Horizontal Face of a Beam Element01:16

    Shear on the Horizontal Face of a Beam Element

    To understand shear on the flat side of a prismatic beam element, consider the vertical and horizontal shearing forces, and the normal forces, acting on the element. The element's upper (U) and lower (L) sections, which are divided by the beam's neutral axis, are examined. The equilibrium of these forces is determined by applying the equilibrium equation, which helps identify the horizontal shearing force. This force is directly related to the bending moments and the cross-section's...
    574
    Prismatic Beams: Problem Solving01:15

    Prismatic Beams: Problem Solving

    In the design of a supported timber beam subjected to a distributed load, both the beam's physical dimensions and the timber's characteristics, such as its grade and species, are critical. These factors determine the allowable stress values, which are crucial for calculating the necessary beam depth to ensure structural integrity and safety.
    The design begins with analyzing the beam as a free body to identify moments and force balances, thereby determining support reactions. Next, the...
    500