PCDD/Fs removal efficiency by electrostatic precipitator and wetfine scrubber in an iron ore sintering plant

This study investigates the removal efficiency of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) by the APCDs of an iron ore sintering plant, an electrostatic precipitator (ESP) and a wetfine scrubbing system (WS). The removal efficiencies of the ESP on the total PCDD/Fs concentration and the total PCDD/Fs I-TEQ concentration are 44.3% and 41.4%, respectively, while those of the WS are 66.7% and 68.4%, respectively, but the vapor/solid phase distribution changes after APCDs abatement. At ESP inlet, the PCDD/Fs account for 31.2% in vapor phase and for 68.8% in particulate phase while, at ESP outlet, the PCDD/Fs account for 63.3% in vapor phase and for 36.7% in solid phase. The ESP removes effectively solid-phase PCDD/Fs for its effectiveness to capture the particulate while it is ineffective in removing vapor-phase PCDD/Fs. It, on the contrary, increase for the vaporization within the ESP, especially for these congeners with a lower chlorination degree, and for the PCDD/Fs "stripping" from particulate to gas-phase during the sampling. At WS inlet, the PCDD/Fs account for 63.3% in vapor phase and for 36.7% in solid phase while, at WS outlet, the PCDD/Fs account for 21.4% in vapor phase and for 78.6% in solid phase. Considering that WS outlet temperature is about 40 degrees C, the PCDD/Fs vapor-phase condense to particles: therefore, even if the particulate is removed by WS, the final result is that PCDD/Fs percentage decreases in vapor-phase and increases in solid-phase.