Characterization of the curing process from high-solids anaerobic digestion

Margaret F Drennan1, Thomas D DiStefano

  • 1Department of Civil and Environmental Engineering, Bucknell University, Lewisburg, PA 17837, USA.

Bioresource Technology
|September 15, 2009
PubMed

Related Concept Videos

Curing of Concrete01:20

Curing of Concrete

The hydration of cement takes place within the water-filled capillary pores. However, environmental elements can disrupt this process by evaporating water from the concrete surfaces. Sealed concrete with a water-cement ratio below 0.5 experiences self-desiccation, leading to water loss. The water loss in concrete is mitigated by curing. This technique involves keeping the concrete saturated to maintain the necessary temperature and moisture conditions, to optimally fill the spaces in the cement...
Microbial Wastewater Treatment01:30

Microbial Wastewater Treatment

Microbial communities in aquatic ecosystems play a key role in the natural breakdown of contaminants introduced through domestic and industrial effluents. Acting as biological catalysts, these microbes change and mineralize a wide range of organic and inorganic pollutants under different redox conditions.In oxygen-rich surface waters, aerobic heterotrophs lead organic matter breakdown, using oxygen as the terminal electron acceptor to efficiently oxidize substrates to carbon dioxide and water.
Accelerated Curing of Concrete01:25

Accelerated Curing of Concrete

Accelerating concrete curing is achieved by applying heat and additional moisture. This process accelerates the hydration of the cement, resulting in an earlier strength gain in the concrete. Steam curing is a method wherein the concrete products are either transported through a chamber on a conveyor belt or encased in plastic, allowing steam at atmospheric pressure to circulate freely around them. This process begins with a phase of moist curing that typically lasts between 3 to 5 hours, after...
Production of Alcohol01:27

Production of Alcohol

Continuous fermentation is a key strategy in industrial ethanol production, particularly when efficiency, scalability, and high yields are essential. This approach allows for uninterrupted operation and optimized resource utilization. The primary feedstock, corn starch, undergoes enzymatic hydrolysis facilitated by α-amylase and glucoamylase. These enzymes break down the starch into fermentable sugars such as glucose, which are readily assimilated by fermentative microorganisms.Fermentation...
Production of Organic Acids01:25

Production of Organic Acids

Lactic acid, an important organic acid extensively applied in food, pharmaceutical, and biodegradable polymer industries, is primarily produced via microbial fermentation. This method is favored over chemical synthesis due to its environmental sustainability and capacity for enantiomerically pure product formation. Among various microbial processes, the fermentation of starch-based substrates stands out due to the abundance and renewability of raw materials like corn and potatoes.Hydrolysis of...
Curing Methods01:26

Curing Methods

Concrete members with a small surface-to-volume ratio are cured by oiling and moistening the forms before casting the concrete member. These forms can be left in place for a prolonged period to prevent moisture loss, and can be wetted if made of a material suitable for wetting. If the forms are removed early, the concrete member is moistened and covered with polythene sheets to maintain moisture. For large horizontal concrete surfaces exposed to dry weather, a temporary covering is suspended...