Related Experiment Video
Updated: Jun 20, 2026
11:59
High-speed Particle Image Velocimetry Near Surfaces
Published on: June 24, 2013
Optical liquid-crystal-television correlator for particle-image-velocimetry processing
Optics Letters
|September 16, 2009
Summary
An inexpensive liquid-crystal television was used as a processor for full-field velocity measurement. This method, utilizing nonspecialized optics, achieved results comparable to digital correlation techniques.
Area of Science:
- Fluid dynamics
- Optical measurement techniques
- Image processing
Background:
- Full-field velocity measurement is crucial in various scientific and engineering disciplines.
- Traditional methods often require specialized and expensive equipment.
- Two-dimensional correlation is a common technique for analyzing velocity fields.
Purpose of the Study:
- To present an inexpensive and accessible method for full-field velocity measurement.
- To evaluate the performance of a liquid-crystal television as a processor for 2D correlation.
- To compare the results with established digital correlation techniques.
Main Methods:
- An inexpensive liquid-crystal television was adapted as a processor for 2D correlation.
- Nonspecialized optical components were employed in the setup.
- The system was used for full-field velocity measurements.
Main Results:
- The liquid-crystal television processor successfully performed 2D correlation for velocity measurements.
- The results obtained using this inexpensive setup showed good agreement with digital correlation methods.
- The use of nonspecialized optics did not compromise the accuracy of the measurements.
Conclusions:
- An affordable liquid-crystal television can be effectively utilized as a processor for full-field velocity measurement.
- This approach offers a cost-effective alternative to conventional digital correlation systems.
- The presented technique demonstrates potential for wider adoption in research and education.
Related Concept Videos
01:26Phase Contrast and Differential Interference Contrast Microscopy
Phase-Contrast Microscopes
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...
01:05Total Internal Reflection Fluorescence Microscopy
Total internal reflection fluorescence microscopy or TIRF is an advanced microscopic technique used to visualize fluorophores in samples close to a solid surface with a higher refractive index, such as a glass coverslip. TIRF only allows fluorophores in proximity to the solid surface to be excited. When light from a medium with a lower refractive index (such as air) hits the glass coverslip at a critical angle, the light undergoes total internal reflection stead of passing through the glass.
01:18Imaging Biological Samples with Optical Microscopy
Optical microscopy uses optic principles to provide detailed images of samples. Antonie van Leeuwenhoek designed the first compound optical microscope in the 17th century to visualize blood cells, bacteria, and yeast cells. In 1830, Joseph Jackson Lister created an essentially modern light microscope. The 20th century saw the development of microscopes with enhanced magnification and resolution.
In optical microscopy, the specimen to be viewed is placed on a glass slide and clipped on the stage...
In optical microscopy, the specimen to be viewed is placed on a glass slide and clipped on the stage...
01:16Confocal Fluorescence Microscopy
Confocal microscopy is an advanced microscopic technique. The prime advantage of the confocal microscope over other microscopy techniques is its ability to block the out-of-focus light from the illuminated samples using pinholes. It is widely used with fluorescence optics to obtain high-resolution, sharp contrast images. Unlike optical microscopes, confocal microscopes use a focused beam of light laser to scan the entire sample surface at different z-planes. These microscopes are, therefore,...