Related Experiment Video
Updated: Jun 20, 2026

Sensing of Barrier Tissue Disruption with an Organic Electrochemical Transistor
Published on: February 10, 2014
A permeable membrane capacitance sensor for ionogenic gases Application to the measurement of total organic carbon
Kang Tian1, Purnendu K Dasgupta
1Department of Chemistry & Biochemistry, University of Texas at Arlington, Arlington, TX 76019-0065, United States.
Abstract:
We introduce a unique sensor, a tubular membrane capacitance sensor (TMCS). Wire electrodes are wrapped on a porous hydrophobic membrane tube and capacitance is measured with an inexpensive universal serial bus powered capacitance to voltage digital converter. At low solution conductivities, the double layer capacitance of the ionic solution is approximately linearly related to the solution conductance. Porous polypropylene hollow fibers were coated repeatedly with silicone rubber solutions to render the pores highly hydrophobic and hence minimize gradual liquid intrusion into the pores that leads to baseline drift. We applied the sensor to the determination of TOC in water samples where the analyte carbon was oxidized to CO(2) by UV/persulfate. The evolved CO(2) is sensed by the TMCS as the water slowly passing through it absorbs the CO(2) resulting in a change in conductance and capacitance. The system was capable of detecting 800ngC as glucose and 100ngC as inorganic carbonate. The sensor combines the dual functions of gas collection and measurement, thus permitting a simple miniature economic device.
More Related Videos
Related Concept Videos
Potentiometry: Membrane Electrodes
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Amperometry: Overview
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...

