Laser-filament-induced corona discharges and remote measurements of electric fields

Femtosecond laser pulses were used to make plasma filaments near an isolated positively or negatively highly biased electrode. The electrode was well positioned to sustain a high voltage up to U(max)=+/-400 kV to avoid the induced breakdown or a glow discharge; the shape of the electrode was chosen to reduce the corona effects at the maximal voltage. The filament's UV emission is shown to be very sensitive to the voltage applied: it increases nonlinearly with the electrode potential. Along with nanosecond filament-induced flashes at both polarities, long, about a half microsecond, corona flashes were observed at the negative polarity.