Related Experiment Video
Updated: Jun 19, 2026

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Removal of natural organic matter using surfactant-modified iron oxide-coated sand
Chunli Ding1, Xin Yang, Wei Liu
1Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong.
Abstract:
Iron oxide-coated sand (IOCS) was modified with hexadecyltrimethyl ammonium (HDTMA) and tested as an adsorbent for the removal of natural organic matter (NOM) from water. The modification did not change the physical properties of the IOCS but coated HDTMA onto its surface. The HDTMA-modified IOCS displayed a faster initial NOM adsorption and substantially higher capacity than the unmodified IOCS over a wide pH range in both batch and column adsorption. The enhancement was more pronounced at higher pH. Compared to unmodified IOCS, the HDTMA-modified IOCS removed more hydrophobic and larger NOM molecules and its NOM adsorption was less sensitive to the changes in ionic strength. The adsorption capacity of the modified IOCS was regenerated in-situ with NaOH solution and ex-situ with HDTMA solution. HDTMA-modified IOCS adsorption may be a promising alternative technology for NOM removal.
Related Concept Videos
Coagulation
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Microbial Bioremediation of Hydrocarbons
Deleterious Substances in Aggregate
Another type of impurity is clay and fine material that...
Microbial Leaching
Bioremediation

