Oxidation of PAHs in a simplified system using peroxy-acid and glass beads: Identification of oxidizing species

Polycyclic aromatic hydrocarbons (PAHs) are organic contaminants of concern due to their ubiquity, persistence in the natural environment and adverse health effects. Numerous studies have looked into the removal and treatment of these contaminants, with mixed results. High molecular weight PAHs have been particularly problematic due to their hydrophobicity and high affinity for organics, resulting in mass transfer limitations for even the fastest advanced oxidation processes (AOPs). The peroxy-acid process has been used to successfully treat PAH contaminated matrices. Experiments were conducted on benzo[a]pyrene contaminated glass beads in order to elucidate the reaction mechanisms responsible for the effectiveness of this process. For the first time peracetic acid (PAA) was identified as the important oxidant in this reaction. Different v/v/v ratios of hydrogen peroxide/acetic acid/DI water were studied which illustrated the importance of reaction ratio on oxidant concentration and rate of formation. Approximately 60% degradation of benzo[a]pyrene was achieved in 24 hours with 1.7% PAA. Observations of the reaction kinetics suggest that the slow desorption/dissolution of benzo[a]pyrene limits the efficiency of the peroxy-acid process. Modifications of the reaction setup supported this observation as treatment efficiencies increased with reactive surface area, and an increase in system agitation. These limitations were also overcome by increasing the concentration of PAA delivered to the contaminated matrix. Greater than 80% degradation of benzo[a]pyrene was achieved in 24 hours with approximately 9.2% PAA.