Related Experiment Video
Updated: Jun 19, 2026

Measuring Sub-23 Nanometer Real Driving Particle Number Emissions Using the Portable DownToTen Sampling System
Published on: May 22, 2020
Chemical tracers of particulate emissions from commercial shipping
Mar Viana1, Fulvio Amato, Andrés Alastuey
1Institute for Environmental Assessment and Water Research (IDAEA-CSIC), and Carlos III Health Institute, Ctra Majadahonda - Pozuelo km 2, 28220 Majadahonda, Madrid, Spain. mar.viana@idaea.csic.es
Abstract:
Despite the increase of commercial shipping around the world, data are yet relatively scarce on the contribution of these emissions to ambient air particulates. One of the reasons is the complexity in the detection and estimation of shipping contributions to ambient particulates in harbor and urban environments, given the similarity with tracers of other combustion sources. This study aimed to identify specific tracers of shipping emissions in a Mediterranean city with an important harbor (Melilla, Spain). Results showed that for 24 h PM10 and PM2.5 samples, valid tracers of commercial shipping emissions were ratios of V/Ni = 4-5 and V/EC < 2, whereas V/EC > 8 excluded the influence of shipping emissions. Other ratios (V/ S, La/Ce, Zn/Ni, Pb/Zn, OC/EC) and tracers (Pb, Zn) were also tested but did not correlate with this source. Due to the changing composition of diesel fuels, tracers in the Mediterranean Sea may not be representative in other regions of the world and vice versa. The contribution of shipping emissions to ambient particulate matter (PM) urban background levels was quantified by positive matrix factorization (PMF), resulting in 2% and 4% of mean annual PM10 levels (0.8 microg/m3 primary particles and 1.7 microg/m3 secondary particles, with 20% uncertainty) and 14% of mean annual PM2.5 levels (2.6 microg/m3).
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...

