Related Experiment Video
Updated: Jun 19, 2026

Advances in Nanoscale Infrared Spectroscopy to Explore Multiphase Polymeric Systems
Published on: June 23, 2023
Rheo-optical study of polymers by using time-resolved soft-pulse compression attenuated total reflection step-scan
Yuji Nishikawa1, Tatsuhiko Nakano, Isao Noda
1Material Analysis Division, Material Technology R&D Laboratories, Konica Minolta Technology Center Inc., 1 Sakura-machi, Hino-shi, Tokyo, 191-8511, Japan. yuji.nishikawa@konicaminolta.jp
Abstract:
A time-resolved soft-pulse dynamic compression attenuated total reflection (ATR) step-scan Fourier transform rheo-optical system has been developed. This system was used to observe different viscoelastic properties of polyethyleneterephthalate (PET) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHx). Resonance features were observed in the dynamic compression ATR spectrum of PHBHx with 625 Hz soft-pulse frequency. In contrast, the dynamic compression ATR spectrum of PET showed no resonance features. The resonance feature of PHBHx was found at 1723 cm(-1), which corresponds to the structural or morphological reorganization of a less ordered (Type II) crystalline form under compressive perturbation. The time-resolved evolution of infrared (IR) spectra was effectively analyzed by conventional generalized two-dimensional (2D) correlation analysis. The 2D-IR results indicate that the dynamic response of the well-ordered Type I crystalline state (1289 and 1261 cm(-1)) is faster than that of the Type II (1723, 1277, and 1228 cm(-1)). The present method shows promise for characterizing a wide variety of viscoelastic materials, including polymer alloys, blends, composites, and copolymers, and semicrystalline polymers.
More Related Videos
09:57Ultrafast Time-resolved Near-IR Stimulated Raman Measurements of Functional π-conjugate Systems
Published on: February 10, 2020
10:03Proton Transfer and Protein Conformation Dynamics in Photosensitive Proteins by Time-resolved Step-scan Fourier-transform Infrared Spectroscopy
Published on: June 27, 2014
Related Concept Videos
Attenuated Total Reflectance (ATR) Infrared Spectroscopy: Overview
The ATR process begins by directing a beam...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and the...