Study of a membrane bioreactor with glass fiber flat grille modules and the modules' optimization based on the local...

A novel flat grille membrane module using inorganic glass fibers as filter media is proposed for use in a membrane bioreactor for wastewater treatment. A model which integrates the concepts of back transport velocity, spatial local critical flux and temporal variation of the local flux has been developed. The membrane module was optimized based on experimental results and calculations using the model. The optimized parameters include the volume ratio of membrane solution for the surface modification of glass fibers, the fiber inner diameter and fiber length. The optimal values were 1:2 and 5mm respectively but the length had little effect on the performance of the module. The critical time was then calculated with the model and an equation developed. The result was in very good agreement with the observed one. Finally, the performance of the glass fiber MBR was monitored. The effluent quality and stability of the system were comparable to that of conventional MBRs. This MBR will be a promising technique for wastewater treatment given its low cost, high strength and good effluent quality.