Thermodynamics and kinetic studies of biosorption of a basic dye from aqueous solution using green algae Ulothrix sp
Related Experiment Video
Updated: Jun 18, 2026

Optimize Flue Gas Settings to Promote Microalgae Growth in Photobioreactors via Computer Simulations
Published on: October 1, 2013
Cetin Doğar1, Ahmet Gürses, Metin Açikyildiz
1Erzincan University, Education Faculty, Department of Science Education, Erzincan, Turkey.
Abstract:
This study addresses removal of a basic dye, methylene blue, from aqueous solutions by using dried Ulothrix sp. biomass as biosorbent. The effects of the initial dye concentration, contact time, temperature, solution equilibrium pH, biosorbent dosage, and mixing rate on biosorption of the dye have been investigated. It was found that 30min is sufficient in order to reach adsorption equilibrium. The amount of methylene blue adsorbed onto Ulothrix sp. increased with increasing equilibrium pH and mixing rate, in contrary, it decreased with increasing temperature and sorbent dosage. The process followed the pseudo-second-order kinetic model. The isosteric enthalpy and entropy values were calculated as -11.8kJ/mol and 37.5J/(molK), respectively. In addition, the results suggest that the physical interactions between sorbent particles and sorbate ions play an important role for the adsorption of methylene blue onto the biosorbent.
More Related Videos
10:08Construction and Setup of a Bench-scale Algal Photosynthetic Bioreactor with Temperature, Light, and pH Monitoring for Kinetic Growth Tests
Published on: June 14, 2017
05:21Operation of Laboratory Photobioreactors with Online Growth Measurements and Customizable Light Regimes
Published on: October 28, 2021
Related Concept Videos
Biofuels
Green Algae
Microbial Bioremediation of Hydrocarbons
Bioremediation