Clarification properties of trash and stalk tissues from sugar cane

The effect of the U.S. and worldwide change from burnt to unburnt (green) sugar cane harvesting on processing and the use of sugar cane leaves and tops as a biomass source has not been fully characterized. Sugar cane whole-stalks were harvested from the first ratoon (repeat) crop of five commercial, Louisiana sugar cane varieties (LCP 85-384, HoCP 96-540, L 97-128, L 99-226, and L 99-233). Replicated sample tissues of brown, dry leaves (BL), green leaves (GL), growing point region (GPR), and stalk (S) were separated. Composite juice from each tissue type was clarified following a hot lime clarification process operated by most U.S. factories. Only GPR and GL juices foamed on heating and followed the normal settling behavior of factory sugar cane juice, although GL was markedly slower than GPR. GPR juice aided settling. S juice tended to thin out rather than follow normal settling and exhibited the most unwanted upward motion of flocs. Most varietal variation in settling, mud, and clarified juice (CJ) characteristics occurred for GL. The quality rather than the quantity of impurities in the different tissues mostly affected the volume of mud produced: After 30 min of settling, mud volume per unit tissue juice degrees Brix (% dissolved solids) varied markedly among the tissues (S 1.09, BL 11.3, GPR 3.0, and GL 3.1 mL/degrees Brix). Heat transfer properties of tissue juices and CJs are described. Clarification was unable to remove all BL cellulosic particles. GL and BL increased color, turbidity, and suspended particles in CJs with BL worse than GL. This will make the future attainment of very high pol (VHP) raw sugar in the U.S. more difficult. Although optimization of factory unit processes will alleviate extra trash problems, economical strategies to reduce the amount of green and brown leaves processed need to be identified and implemented.