Related Experiment Video
Updated: Jun 17, 2026

Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019
A comparison of co-combustion characteristics of coal with wood and hydrothermally treated municipal solid waste
Marisamy Muthuraman1, Tomoaki Namioka, Kunio Yoshikawa
1Department of Environmental Science and Technology, Tokyo Institute of Technology, Midori-ku, Yokohama 226-8502, Japan. muthuraman.m.aa@m.titech.ac.jp
Abstract:
In this work, thermogravimetric analysis was used to investigate the co-combustion characteristics of wood and municipal solid waste (MSW) with Indian coal. Combustion characteristics like volatile release, ignition were studied. Wood presented an enhanced reaction rate reflecting its high volatile and low ash contents, while MSW enhanced ignition behavior of Indian coal. The results indicate that blending of both, wood and MSW improves devolatization properties of coal. Significant interaction was detected between wood and Indian coal, and reactivity of coal has improved upon blending with wood. On the other hand, MSW shows a good interaction with Indian coal leading to significant reduction in ignition temperature of coal and this effect was more pronounced with higher blending ratio of MSW. Hence MSW blending could more positively support the combustion of low quality Indian coal as compared to wood, due to its property of enhancement of ignition characteristics.
Related Concept Videos
Microbial Wastewater Treatment
Enthalpy and Heat of Reaction
Biological Treatment of Effluent and Waste Water
Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified petroleum gas (LPG), fuel oil, gasoline, diesel fuel, and...
Microbial Bioremediation of Hydrocarbons
Microbial Fuel Cells

