Related Experiment Video

Updated: Jun 17, 2026

Experimental Procedure for Warm Spinning of Cast Aluminum Components
07:36

Experimental Procedure for Warm Spinning of Cast Aluminum Components

Published on: February 1, 2017

The formation of uniform beams from long and thin radiators

A C Malliaris

    Applied Optics
    |January 16, 2010
    PubMed

    More Related Videos

    Automatic Laser-based Geometry Capture for Finite Element Analysis of Weld Beads07:58

    Automatic Laser-based Geometry Capture for Finite Element Analysis of Weld Beads

    Published on: July 25, 2025

    Knowledge Based Cloud FE Simulation of Sheet Metal Forming Processes11:05

    Knowledge Based Cloud FE Simulation of Sheet Metal Forming Processes

    Published on: December 13, 2016

    Related Concept Videos

    Design of Prismatic Beams for Bending01:23

    Design of Prismatic Beams for Bending

    The design of prismatic beams, structural elements with a uniform cross-section, focuses on ensuring safety and structural integrity under load. The design process begins by determining the allowable stress, either from material properties tables, or by dividing the material's ultimate strength by a safety factor. This safety factor is essential for accommodating uncertainties, and varies depending on the material—timber, steel, or concrete—with each having unique strength and stress...
    Beams01:30

    Beams

    Beams are integral components of structural engineering and construction, designed to support loads applied at various points along their length. These long, straight members can be classified based on geometry, cross-section, support type, and equilibrium condition.
    Based on geometry, beams can be straight, tapered, or curved. Straight beams are the most common type and have a constant cross-section throughout their length. Tapered beams, on the other hand, have a varying cross-section along...
    Distribution of Stresses in a Narrow Rectangular Beam01:11

    Distribution of Stresses in a Narrow Rectangular Beam

    In studying beam stress distribution, examining an elemental section is essential. To determine the average shearing stress on this face, the calculated shear is divided by the surface area. Importantly, shearing stresses on the beam's transverse and horizontal planes mirror each other, indicating a consistent stress distribution along the upper region of the beam. Notably, shearing stresses are absent at the beam's upper and lower surfaces due to the absence of applied forces in these areas.
    Structural Steel Products01:24

    Structural Steel Products

    Structural steel products are created within a structural mill. The process begins with a beam blank that is reheated and then fed through a series of rollers. These rollers progressively shape the metal into its final form. Adjusting the spacings between the rollers allows for the production of different sections with the same nominal dimensions.
    Once shaped, the steel's final form emerges as a continuous length, which is then segmented by a hot saw into manageable pieces. These segments are...
    Shear on the Horizontal Face of a Beam Element01:16

    Shear on the Horizontal Face of a Beam Element

    To understand shear on the flat side of a prismatic beam element, consider the vertical and horizontal shearing forces, and the normal forces, acting on the element. The element's upper (U) and lower (L) sections, which are divided by the beam's neutral axis, are examined. The equilibrium of these forces is determined by applying the equilibrium equation, which helps identify the horizontal shearing force. This force is directly related to the bending moments and the cross-section's first...
    Steady, Laminar Flow in Circular Tubes01:23

    Steady, Laminar Flow in Circular Tubes

    Hagen-Poiseuille flow describes a viscous fluid's steady, incompressible flow through a cylindrical tube with a constant radius R. This flow profile is often applied to understand fluid transport in narrow channels, such as capillaries. It serves as a foundational example of laminar flow. In this model, cylindrical coordinates (r,θ,z) are used to describe the radial (r), angular (θ), and axial (z) dimensions within the tube. For Hagen-Poiseuille flow, the velocity profile is purely axial,...